Greddy AIR INTAKE SYSTEMS: Infiniti G35 / Nissan 350Z DE Manual de usuario

Busca en linea o descarga Manual de usuario para Para El Coche Greddy AIR INTAKE SYSTEMS: Infiniti G35 / Nissan 350Z DE . GReddy AIR INTAKE SYSTEMS: Infiniti G35 / Nissan 350Z DE 2003-06 User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 2
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
Installation
1
Complete Stock intake. Please disconnect battery
terminals before installation.
2
Loosen the 4 bolts using 10mm socket or wrench
holding in engine cover and remove.
3
With T20 Torx bit, loosen the 2 bolts holding in MAF
sensor. Carefully remove sensor out of stock intake.
7
With provided M4 screws, install MAF sensor to new
intake tube.
8
Install coupler with clamps to throttle body. Tighten
clamp on throttle body side only.
9
With 10mm socket and ratchet, remove the two 10mm
bolts from the OEM intake tube and airbox. Loosen
the top of OEM intake tube w/ 5/16” nut driver.
4
Remove crank case line from stock intake tube.
Disconnect MAF sensor harness.
5
Carefully remove stock air box assembly out of vehicle.
(ram scoop optional.)
6
06-80497 Pg1
Parts Identification:
1 Air filter (
61-90128)
1 Intake tube, 05-T3001P1 (Polished)
1 Coupling, straight 3” x 2”L 05-00664
2 Clamp #048
1 Flat washer M6
1 Hex screw M6
2 Screw M4 x .7 x 8
Tools Required:
10mm socket or wrench
Ratchet w/ extension
Phillips screw driver
Flat head screw driver
5/16” nut driver
Pliers
Note: Read instructions before
installation and have tools ready.
Kit P/N:
12529004 (Polished)
Make:
Infiniti
Model: Year: Engine:
G35 ’03.5-’06 Coupe (No circular MAS) V6-3.5L
G35 ‘03.5-’07 Sedan (No circular MAS) V6-3.5L
Make:
Nissan
Model: Year: Engine:
350Z ’03-’06 V6-3.5L
Vista de pagina 0
1 2

Indice de contenidos

Pagina 1 - Installation

Installation1Complete Stock intake. Please disconnect batteryterminals before installation.2Loosen the 4 bolts using 10mm socket or wrenchholding in e

Pagina 2 - Accessories

Install air filter to intake tube and tighten using 5/16” nutdriver.10Align intake to coupler on throttle body and bracketlocation.11Attach cr

Comentarios a estos manuales

Sin comentarios